气动冲床 |
用途 Purpose |
KB04-1型气动型全自动台式精密压力机,属小型精密压力设备,适合电子、仪表,钟表、照相机、首饰、小五金及服装、鞋帽业。可对薄板、条科,卷材,进行剪切,冲孔、落料、弯曲、铆合等工序。适用有色金属.塑料件的加工;本机生产效率高,精度好、操作灵敏简便,应用广泛。 |
KB04-1 pneumatic full auto table type precision pressure gauge, is mini precision press equipment, suitable for electronic, instrument, watch, camera, ornaments, hardware and garment, shoes and cap industries. It can cut, punch and feed material, bend and rivet thin board, strip material, roll material and so on. It is used for processing of non-ferrous metal, plastics. This machine has high productive efficiency, fine precision, simple
and sensitive operation, wide usage. |
|
精度 Precision |
精 度 项 目 Precision item |
允差
KB04-1
|
工作台台面的平面度 Planeness of work table-board |
0.030
|
滑块下平面的平面度 Planeness of dieblock plane |
0.010
|
摸柄孔对滑块下平面的垂直度 Verticality between handle hole and dleblock lower plance
|
0.025
|
滑块下平面对工作台台面的平行度
Parallelism between dieblock plane and work table table-board |
左右 Left Right
前后 Front Back
|
0.020
0.025
|
滑块行程对工作台台面的垂直度
The verticality between dieblock stage and work table table-board
|
左右 Left Right
前后 Front Back
|
0.010
0.015
|
|
技术参数 Main technical parameters |
型号 Model |
单位
|
KB04-1
|
公称力 Nominal force |
KN
|
10(1)
|
滑块行程 Dieblock stage |
mm
|
60
|
气缸直径 Air cylinder diameter |
mm
|
100*2
|
最大封闭高度 Max sealed highness |
mm
|
150
|
立柱中心距离 Column center distance |
mm
|
150
|
摸柄孔直径 Handle hole diameter |
mm
|
20*40
|
工作台面尺寸(左右X前后) Work table dimension (left and right x front and rear) |
mm
|
288*202
|
气缸工作压力 Air cylinder working pressure |
Kg/cm2
|
1
|
2
|
3
|
4
|
活塞推动力 piston motive force |
Kg
|
152.1
|
304.3
|
456.5
|
608.6
|
气缸工作压力 Air cylinder working pressure |
Kg/cm2
|
5
|
6
|
7
|
8
|
活塞推动力 Piston motive force |
Kg
|
760.8
|
913
|
1065.1
|
1217.3
|
外形尺寸(长X宽X高) Overall dimension(LxWxH) |
mm
|
500*340*570
|
电压/耗电量 Voltage/power consumption |
AC/DC
|
220V/3.0W
|
机床重量 Punch heavy |
Kg
|
54
|
|
|
|
|
|
|